Showing posts with label Guild Ball: Mason's. Show all posts
Showing posts with label Guild Ball: Mason's. Show all posts

August 23, 2019

April 2, 2019

Guild Ball: Mason's Guild 'Corbelli' Card

The card for the new Captain of the Mason's Guild was released this morning by Steamforged Games and boy can he score.  The first Guild Ball player with a natural 5 Kick stat.

To get the full write up and see everything what 'Corbelli' can do, please visit the story on SFG's blog HERE.



March 26, 2019

March 19, 2019

December 12, 2018

Guild Ball: Mason's Guild 'Veteran Chisel'

It has been quite awhile since I last worked on a Mason's Guild model, but now the Guild is back to being fully completed.  'Veteran Chisel' comes from "The Faithful New Beginnings" box, which are players loyal to their teammates and Guild, respect and honour foremost in their minds as they begin the next chapter of their lives.



 Veteran Chisel

Veteran Chisel

Painting Points: 1

January 13, 2018

September 19, 2017

Guild Ball: Mason's Guild 'Chisel'

Well there we go, the final model for the Mason's Guild, at least for now....back at GenCon 2017 in August, SteamForged did release a model called 'Lucky' that can be played with the Brewer's or the Mason's Guild.  Currently that model is only available at conventions or through an escalation league.  Eventually we'll get a hold of 'Luck', more than likely at SteamCon USA in December.

Today we have 'Chisel', an Attacking Midfielder for the Mason's.  I also enjoyed painting this model a lot like I did with 'Granite'.

Onto some of her stats....looking at her Playbook, I wish she did some more damage that was Momentous, see like 2 is the highest with Momentum but can do up to 4 damage.  Painful Rage does give her [+2] TAC and [+1] DMG to Playbook damage results when her HP's fall below 6.  If she is running relaly low on HP, she can use Sadism for the cost of 1 Influence that she may recover [1] HP when an enemy model within her 4" Aura suffers damage.



Chisel

Chisel

Painting Points: 1

September 18, 2017

Guild Ball: Mason's Guild 'Veteran Harmony'

Coming down to the final 2 models for the Mason's Guild.  I think once the Mason's get wrapped up, it will finally be time to start working on the Farmers's Guild.  The Fall Season is coming really soon and there is not a better time to be working on 'The Honest Land'.  Anyways, back to the Mason's.  Today we have a Veteran Attacking Midfielder with 'Veteran Harmony'.




Veteran Harmony

Veteran Harmony

Painting Points: 1

September 17, 2017

Guild Ball: Mason's Guild 'Wrecker'

Well today's post was suppose to be a battle report of the Farmer's Release Event in Grand Rapids yesterday, but this past Thursday I came down with a cold and when I woke up yesterday I still was not feeling that good to attend the event.  I did not think it would be right to stand 3' across from someone coughing and sneezing all day.  So I am really disappointed in missing the event since it was classified as a friendly event and not a tournament, and needed to just get some more games in.

To get back to today's post, we are going to continue on with the final 3 Mason's needed to complete the Mason's Guild.

First up we have another one of their Mascot's with 'Wrecker'.



Wrecker

Wrecker

Painting Points: 2

September 11, 2017

Guild Ball: More Goodies Inbound

This past Saturday my wife and I took a trip 75 miles North to Grand Rapids, Michigan.  Since moving to Michigan last fall it was the first time I visited the city.  Grand Rapids is a pretty decent sized city (probably the largest in Western Michigan) with a couple of different shopping malls.  So since she was off from work that day, we took a little road trip.  Up in Grand Rapids is also a gaming store called Big Kidz Games, I have been meaning to check out that store, but 150 miles round trip is a lot of gas.  So this was a perfect time to check it out. I could pick up some model for my Guild Ball Guilds, and then I can take the wife to the shopping malls.

It has not been officially stated yet, but it looks like Steamforged Games will be eliminating the single model blisters and move towards packaging the Guilds with 6 Players in a box.  A few months ago they have been re-releasing the models in these 6 Player boxes, and the new Farmer's and Blacksmith's Guilds are coming packaged with 6 Players.  The local gaming stores are also stating they can no longer order the indivdual models and Steamforged have also removed them from their website.  I can see where this is easier for them to sell the product, and local gaming stores just stocking the boxes (not having to make room for all the individual model), but a gamer/collector that already has some of these models and just looking to fill in a few missing models, it will be harder for them.

Once I've seen the pattern shift towards this trend, I decided to slowly start filling in my missing models to complete all the Guilds.  So while up at Big Kidz Games, I purchased everything that I needed that they had in stock.

Fisherman's Guild:
Corsair
Kraken
Tentacles
Veteran Siren

Mason's Guild:
Chisel
Veteran Harmony
Wrecker

Mortician's Guild:
Veteran Graves
Vileswarm

The Union:
Fangtooth
Strongbox




I am still short 4 models, for the Mortician's 'Brainpan and Memory' (2 models, single blister) and for The Union 'Mist' and 'Snakeskin'.  I am also short 6 models for the Brewer's Guild, but coming this October, those 6 Brewer's models will be packaged in a boxed set and I will just make that purchase.

There are still other models that I do not have like Limited Edition versions, Resin versions, and Kickstarter versions, but my goal is to have all of the regular models for the Guilds.  Then going forward I can just purchase the new 6 Player Guild boxes.

Looks like I am keeping myself busy with Guild Ball.




September 10, 2017

Guild Ball: Mason's Guild 'Tower'

For my second Mason's model of the day, we have a Defensive Midfielder with 'Tower'.  I actually just painted this model up this past Friday night and enjoyed painting him.  Yes my color scheme is the same through out my Mason's (my intentions, I like my Guild to have a look of a Team) but the quality of the metal miniatures are a joy to paint.

'Tower' was the last of my Mason's models to get completed.  Come back later today for another post on what's in the queue.



Tower

Tower

Painting Points: 1

Guild Ball: Mason's Guild 'Hammer'

I am now finally to the point where I am catching up with models that were painted in September.  Up until now the previous Mason Players I had completed at the end of August.

Since I missed yesterday's post, I will double up on model posts again today.

First up we have the second Captain for the Mason's Guild, 'Hammer'.

This was the first model my son had purchased for the Mason's to compliment the original Kick-Off! 6.  He added him to the collection back at AdeptiCon 2017 in March.  I am glad 6 months later he is completed.

'Hammer' went through some eratta changes at the end of July to make him more playable, it seems most Mason players were choosing 'Honour' as their Captain.

2 of the big changes to his card were, all 3 of his Character Plays's were increased from 4" to 6" and his Heroic Play was moved to become his Legendary Play.

'Hammer' came out really really nice, but my pictures below do not do him justice.



Hammer

Hammer

Painting Points: 1

September 8, 2017

Guild Ball: Mason's Guild 'Mallet'

Now we have 'Mallet', a Defensive Midfielder for the Mason's Guild.  I actually like the stats on this card a lot.

His Character Play Singled Out on a Playbook result of 1 will then give him a TAC 7 for his remaining attacks along with Extended Reach maing his melee zone 3".

'Mallet' seems like the type of player that can actually put out some damage.




Mallet

Mallet

Painting Points: 1
Subscribe to: Posts (Atom)